M1811 Grip Module – Coyote
Only 5 left in stock
Compatibility: Sig Sauer P320 9mm / 357 sig / 40
The M1811 Grip Module is compatible with SIG P320 models equipped with and without the Safety Selector. All modules ship without the cutout for the Safety Selector, however, a recess has been added inside the module to assist in guiding the cutout. A rotary tool with a 1/8″ burr bit is preferred. See our product details page for more info.
If you would like Brouwer LLC to perform the Safety Selector cut out for you, please select it from the drop-down below, and allow 2-3 additional days for processing.
Only 5 left in stock
The Brouwer M1811 grip module corrects the main ergonomic issues with the p320 platform – high bore axis, rounded slippery grip, short beavertail. The modern M1911 pistol is the standard for shooting performance, control, and ergonomics. The overall grip shape, feel, and design of the modern 1911 has not been replicated until now. With the design of the SIG P320 series, we were able to bring some of that performance and control to polymer pistols.
|Dimensions||7 × 1.5 × 10 in|
Shane (verified owner) –
This thing…this thing is where it’s at. I have tried most Sig P320 Grip Modules on the market, put lots of rounds through them, and none of them come close to the M1811. So I do have a small spot in my heart where 1911’s hangout and like to remind me that even though I won’t carry them again, that they still are pure American sexy. Well, I have a few 320’s that I carry majority of the time now, one of them being an M17 with the Safety deleted, TLR-1HL, and rocking a flat faced trigger. I always wanted a 1911 to be a bit lighter to carry, and hold more rounds and what better way to do that, then to get one of these modules! Sure enough, as soon as I get it, took it to the range for a few hundred rounds of a burn down and accuracy test to make sure she functions properly. At the end of that range session, I came to the conclusion that this is the only Grip Module I will run on my M17, and it will be my main carry because of it. I do carry AIWB and the grip is nice and thin (but like a good 1911 it still fills the hand) and doesn’t print at all. For anyone looking to get a Light-Bearing AIWB holster that will fit that combo, Eclipse Holsters’ Siruis will work just fine. The grip module is great homie’s thanks!
Zachary (verified owner) –
This grip fixes many of the problems with the P320 platform. The grip angle is comfortable and was very easy to swap out. The manual safety cut was perfectly done.
Charles Andrasko (verified owner) –
This is a great grip. So comfortable and as a 1911 shooter very familiar. The p320 grip is a bit to vertical for me. Wish you had more colors though. Maybe a light grey.
RADHAMES (verified owner) –
It was just amazing. The fit was perfect and the grip angle made everything just work. It helped with the dot acquisition. Since i have a X-compact slide, i cut the excess grip and it worked out perfectly. Thanks to Matthew for all his help and answering all my questions which I’m sure he gets fifty times a day. Perfect product. I’m getting the black one next.
Dakota (verified owner) –
Very well made and easy to install. A little slick but that was easily fixed with some grip tape. Looking forward to the magwells being available!
Charles (verified owner) –
It’s fantastic. Do it now. Why are you still reading this? Did you buy it? Buy it. Now. I got one without the extra grippy stuff in it and dropped in my mag release and it’s…yûss. It’s what the M18 shoulda been from the factory. Bröthêrs, it’s worth the money.
Thomas G. (verified owner) –
The silicone inserts make this grip module a winner!
Mason L. (verified owner) –
This is a MUST in regards to upgrading your P320. Even with the weight of a stock Legion X5 grip, this one blows it out of the water.
James V. (verified owner) –
I love this grip! Much better than the stock M17 grip.
Aaron (verified owner) –
This grip is amazing, it completely changes the feel of my p320. I have the m18, x grip, tungsten infused, and Wilson combat grip modules and this is by far the absolute best one. The only criticism I have, and it is extremely minor, is I with the texture on the sides was as aggressive as the front and back. However, it is thick enough that you could send it off to be stippled. 100% would recommend.
Alexis N. (verified owner) –
Joseph (verified owner) –
Excellent and product and extremely great customer service!
Robert (verified owner) –
Awesome product 👌 for me its comfortable was able to get good control and handling when I took it out to the range. I’d recommend it to friends and family
Stephen Harmon (verified owner) –
I would give this product a 100 out of 5 if I could. Handling feels great, waiting for the magwell extension to drop but this is the best grip/frame for a 320 I’ve ever dealt with!
Ryan Kuperus (verified owner) –
David Liwanag (verified owner) –
My opinion and preference for the P320/M17/M18 completely changed for the better with this grip. My hand is on the small side of medium and the pistol now fits very much like a 1911. The SIG X-grip was better than stock, but not as nice as the Brouwer.
With a trigger job and Apex trigger bar it now breaks at a clean, crisp 4.25 pounds — no more “Staple gun” break.
The 1811 grip and trigger job make this a VERY worthy (and much more reasonably-priced) competitor to the Staccato and Prodigy — from someone who has carried a Government Model for almost 50 years.
My son set up his Camp Perry M17 with a Brouwer grip with the new textured surfaces (photo is original grip before texture):
John Schwertfeger (verified owner) –
This product is awesome. The 320 is a great platform but the factory grips feel like you are holding a potatoe. This solves that and makes the 320 really come into its own
Gatlin (verified owner) –
The 1911esque feel of the weapon is superb, the stock grip is absolute garbagio next to this. 10/10 would buy again.
Kip (verified owner) –
Great grip, instantly enhanced shooting performance and feel!
Brian B. (verified owner) –
Pleasantly surprised by both the quality of the product and the excellent customer service!
Rayhan S. (verified owner) –
Overall improved grip, not a fan of how slick the grip feels, some texturing would’ve been idea to really sucker down that grip. But this is by far one the best modules to have come out for this platform. I can’t wait to see what they do next.
flyingbfarm (verified owner) –
Won a P320 M18 in a raffle draw, I had shot one before and was “meh” I’ve been a 1911 and a 2011 guy lately and I saw this grip module and ordered it. And wow, it’s changed the whole dynamic of this platform for me. Fit and finish is top notch, color is as close to perfect as the factory as possible. The overall aesthetic is nice. I had a little trouble with my mag release and it being a little stiff but it will wear in I’m sure. Y’all definitely have an awesome product with this one. I’m telling anyone that has a 320 to check it out. Well done 👍🏻
bigmikeky_ on Instagram
waterdog125 (verified owner) –
This is a really well built grip module the tan color matches the stock sig coyote grip module very well. I purchased one to try specifically on my Sig P250 and it works! It will not work with the original, pre upgraded sig fat trigger from the P250, however it does work well with both the sig lightened (M17/18) style thin trigger and the sig flat faced trigger. The grip does not come with the Magazine Release so you will need to purchase one of those separately. This Grip works with the Sig P250 Fire Control Units as long as you also upgrade the trigger away from the stock fat trigger, for a hammer fired M1811 style firearm.